SUPERIOR YIELD
- •50, 80 and 100 kW hybrid inverter options
- •Up to 200% PV oversizing, with a DC/AC ratio of up to 2.0
- •Up to 10 MPPTs and 20 PV strings, with 40 A per MPPT supported through branch connectors
ROBUST BACKUP POWER
- •Built-in ATS enables on-grid/off-grid switching in ≤10 ms
- •150% off-grid overload capability for 10 seconds
- •Grid-connected and off-grid operation support flexible configurations for designated backup loads
FLEXIBLE AND SCALABLE ESS
- •12.5 kWh battery modules support 50–250 kWh per inverter without a battery junction box
- •Expand storage to up to 1,000 kWh per inverter with three SJC160-02 battery junction boxes
- •DC-coupled architecture supports new PV installations and retrofit upgrades
SAFETY AND EASY MAINTENANCE
- •SJC160-02 battery junction box features IP66 protection, C5 corrosion resistance, integrated fuses and DC isolation
- •Three-step commissioning through iSolarCloud, with centralised monitoring and remote maintenance support
- •PowerKeeper supports mixed use of new and existing battery packs, with balancing taking up to 48 hours
The 12.5kWh modular design enables flexible 50–1000kWh, 2–8h systems, covering peak and nighttime operation and serving applications from small shops to large factories.
The hybrid inverter features a built-in ATS, which achieves seamless switching within 10ms for uninterrupted factory operation.
Level up from installation, deployment, commissioning, operation, maintenance to profit and safety with full-stream optimization.
Install in a Coffee Break with the 50kWh Pre-built Stack
The 50kWh pre-built stack enables rapid forklift-ready deployment, while individual 90kg packs support manual handling and modular expansion or replacement.
Fit even in Corners Maximizing Every Centimeter
The top heat dissipation design enables side intake and top exhaust, allowing seamless back-to-back stacking. Supports multiple layouts to fit tight spaces and maximize usable area.
3-step Setup 5-minute Power Up
With iSolarCloud, complete a PV+ESS plant setup in just 3 steps and start revenue within 5 minutes of commissioning without cross-vendor compatibility issues.
Operate in Water Up to 50cm Depth
With IP66 protection and fully sealed modules, it operates reliably even in 50cm of water. Without inspection or part replacement under harsh conditions for truly maintenance-free performance.
Combine Old and New Batteries, Scale at Will
Featuring pack-level balancing technology, the system achieves full system energy balance within 48 hours, eliminating on-site manual calibration and avoiding full battery replacements.
AI-driven Modes Capture Every Cent
Featuring pack-level balancing technology, the system achieves full system energy balance within 48 hours, eliminating on-site manual calibration and avoiding full battery replacements.
5D Alerts: Triple-guard Protection Cell-to-plant Security
Triple Guard Protection encompasses five dimensional monitoring from cell to cloud, integrating electrical, thermal, and structural safeguards to minimize thermal runaway and ensure safety for both equipment and personnel.
Smart Monitoring and Control Logger1000A-EU
SUNGROW’S VIRTUAL REALITY IS HERE!
CONTACT US
Follow SUNGROW
